CIF 852-A++, Инструкция пользователя

Страница: 11 / 24

HOT AIR STATION CIF 852-A++ Ed 1102
CIF Page 11 sur 24
Before operation

Select the nozzle that matches the sizes of the lC.

Screw up the nozzle, important, always let the window open.

Install the nozzle as picture.

Properly screw down the screw.
5 Start up
SMD REWORKING
How to use the reset button?
The RESET button (button D from the control panel) can be used to reconfigure
temperature and airflow level settings. Once pressed, the system will temporarily switch to
stand-by mode then start the device using default temperature and airflow level values of
100°C and 51, respectively. Pressing the RESET button also removes previously configured
system values.
Do not RESET the system while temperature is still high. Allow the temperature to
drop to a minimum before pressing the reset button. Failure to do so can damage the
heating element as well as the handle because of excessive heat.
Iron Nozzle
Window