CIF 852-A++, Инструкция пользователя

Страница: 16 / 24

HOT AIR STATION CIF 852-A++ Ed 1102
CIF Page 16 sur 24
6 Precaution
The CIF 852-A++ station must not be used near flammable gases, paper or other flammable products. The
nozzle and hot air can cause severe burns. Never touch the heating body and never direct the nozzle to the skin.

DO NOT LET THE TOLL HOLDER GETTING DOWN

DO NOT DISMANTLE THE STATION

UNPLUG THE STATION WHEN NOT USED

WAIT THE NOZZLE GETS COLD BEFORE STORING THE UNIT.
6.1 Advice
1- Use an ESD bracelet before using this station.
2- If it is difficult using this unit, please read again this instruction manual.
3- Do not dismantle the unit, risk of electric hazard.
4-
If you meet any problem or default, please contact your reseller.
7 Staff protection
7.1 Solder paste and solder wire
Solder paste as well as solder wire contain lead, do not forget cleaning your hands after each
handling.
Put the rejects or dust remains in a container especially dedicated for that use.
7.2 Filtration aims ?
Gases and fumes produced during the different manufacturing phases are often toxic. You
must take care of this danger. This protection is above all needed when the worker faces
these gases and fumes all the day long.
During gluing and soldering, the air gets polluted with solvents and isocyanides which are
famous for their carcinogenic effects. Solvent gases and soldering flux can cause asthma,
bronchitis, reduction of pulmonary functions, eyes, skin and respiratory system irritation and
eczema.
Industrial rejects in the atmosphere are more and more regulated.
Many other fields are conc
erned: laboratories, chemical, mechanical, pharmaceutical,…
industries.
Extract and filter polluted air is a protection for:
• the worker and staff around
• the environment.
Extract and filter polluted air is a profitable investment:
• As less staff absence due to professional illnesses gives higher production rates.