CID TRBC162672, Руководство пользователя

Страница: 26 / 68

Xtreme Tree Reaper Brush Cutter
May 2022
26
Use care when operating on uneven terrain or any type of sloped surface.
Keep your cutter low to the ground when working in these conditions to
avoid a roll over that could result in Minor or Serious Injury.
Before Cutting
3.7 Cutting Operations Cont.
1. Always inspect work area before starting the cutter. Locate and mark any
utilities, steel posts, rocks or any other objects that could damage the brush
cutter during operation. NEVER assume the work area is safe.
2. Operate the skid steer loader at a safe speed that will allow you to watch the
area ahead of the cutter & loader.
3. Ensure skid steer engine RPMs are sufficient to deliver the required hydraulic
flow to the brush cutter.
Cutting Ground Level Vegetation
Raise the rear of the brush cutter approximately 4 inches above ground level.
The deck should be slightly sloping downward away from the operator.
4”