CID TRBC162672, Руководство пользователя

Страница: 23 / 68

Xtreme Tree Reaper Brush Cutter
May 2022
23
3.6 Initial Use Procedure
3.5 How to Stop Brush Cutter
If brush cutter vibrates while increasing RPM’s, switch off the auxiliary hydraulic
circuit and investigate the cause. Refer to the Troubleshooting Chart on page 46.
1. Raise the cutter slightly and set skid steer engine RPM to idle.
2.
Switch off the auxiliary hydraulic circuit.
3. Allow the cutter to slow down.
Before operating brush cutter, check the hydraulic fluid level in the skid
steer and add oil if necessary.
Make sure the case drain hose is properly attached to the prime mover’s case
drain connection (high flow models). Warranty may be void if attachment is ran
without the case drain hose connected. Excessive hydraulic pressure can blow
out seals and damage the motor.
Verify that hydraulic hoses are securely locked to the skid steer hydraulic
couplers before starting the brush cutter.
After switching off the auxiliary hydraulic circuit, keep hands and feet clear of the
cutter deck until blade rotation has come to a complete stop.
Stopping the Cutter