CIAT BOX TRI Eco+, Руководство пользователя

Страница: 28 / 104

To change from "USER" mode (restricted access) to "INSTALLER" mode (all
settings), press both arrows on menu scroll button for 5 seconds.
VIII / INSTALLER SETTINGS:
No. Description Possible choices
Temperature :
Used to display the
temperature measured by the
Unit °C
Min. 0
Reverts to "USER" mode if no buttons are pressed for a period of 30 seconds.
10
p y
sensor
Read-only
Max. 51
Default -
Increment -
Level :
Used to display the supply air
d l t d
Unit -
Min. SPeedL
11
speed selected
Read-only
Max. SPeedH
Default -
Increment -
Time :
Used to set the time
Unit hh.mm
Min. 00.00
12
Used to set the time
Necessary for correct system operation when
parameter 01 is set to tIME.
Max. 23.59
Default -
Increment 1 min
WINTER gradient (on water):
Used to set the gradient to
h th WINTER d
Unit °C
Min. 1
13
reach the WINTER mode
setpoint
The longer the gradient (near to 15°C), the more
gradually the heat exchange coils are supplied with
water. Drawback: reaching the temperature setpoint will
be very slow.
The shorter the gradient (near to 1°C), the more rapidly
Max. 15
Default 5
Increment 0.2
SUMMER gradient (on
water):
Unit °C
Min 1
the heat exchange coils are supplied with water.
Drawback: the system is similar to On/Off control.
14
Used to set the gradient to
reach the SUMMER mode
setpoint
Min. 1
Max. 15
Default 8
Increment 0.2
ECO differences : Unit °C
Downward shift in WINTER mode:
15
Adjust the difference to the
setpoint using the comfort
mode
Downward shift in WINTER mode:
e.g. : comfort setpoint 20°C, difference set at 3°C
Î
ECO setpoint = 17°C
Upward shift in SUMMER mode:
e.g. : comfort setpoint 24°C, difference set at 3°C
Î
ECO setpoint = 27°C
Min. 1
Max. 5
Default 3
Increment 0.5
11