CIAS Elettronica S.r.l. PYTHAGORAS3, Руководство пользователя

Страница: 52 / 84


CIAS Elettronica S.r.l. Ed. 1.3
Installation Manual Page 51 of 78 PYTHAGORAS 3
RECEIVER FUNCTION SELECTORS
Symbol Function
SW1 Position 1 = MW Barrier Alignment
Position 2 = MW Barrier parameter Acquisition (Channel, Field Values,
masking and sensitivity threshold acquisition. Indication of
alignment quality)
Position 3 = MW Barrier Walk Test, Masking and sensitivity threshold
acquisition, verification of alignment quality
Position 4 = Doppler sensor Walk Test and Doppler sensitivity
threshold acquisition (Rx Column)
Position 5 = Doppler sensor Walk Test and Doppler sensitivity
threshold acquisition (Tx Column)
Position 6 = NOT Active
Position 7 = NOT Active
Position 8 = Barrier number Read/Write
Position 9 =
Set scenario “AND with 2 technology filter”
Position A = Set scenario “AND with priority filter”
Position B = Set scenario “AND”
Position C =
Set scenario “AND with Anti-climb”
Position D =
Set scenario “AND with Anti-creep”
Position E =
Set scenario “AND with Anti-creep + Anti-climb”
Position F = Set scenario “OR”
Position 0 =
Set scenario “AND with: 2 tech priority filters”
SELECTORS TO SET WORKING PARAMETERS OF RECEIVER
Symbol Function
SW4 Control of anti-
masking sensitivity (“0” = low sensitivity, “F” = High
sensit
ivity, Default = “2”)
SW5
Control of intrusion sensitivity (“0” = Low sensitivity, “F” = High
sensitivity, Default = “7”)
10.1.3 IR Transmitter and Receiver Circuit
TERMINAL BLOCK TX TERMINAL BLOCK RX
Mors Symbol Function Mors Symbol Function
1 Tx + + Power 1 Rx + + Power
2 Tx - - Power 2 Rx - - Power
3 Tx COM Tamper 3 Rx COM Signal Alarm
4 Tx NC Tamper 4 Rx NC Signal Alarm
5 Tx Synch 5 Rx NO Signal Alarm
6 Rx COM Signal EDC
7 Rx NC Signal EDC
8 Rx COM Tamper
9 Rx NC Tamper