CIAS Elettronica S.r.l. CORAL-PLUS, Руководство по установке

Страница: 51 / 72


CIAS Elettronica S.r.l. Ed. 1.5
Installation Handbook page 50 of 66 CORAL-PLUS
RECEIVER TEST POINTS
Symbol Function
Tp 3 Measure of field signal 200 mVpp (Oscilloscope)
Tp 4 Measure of the Automatic Gain Regulator Voltage Value (V RAG)
Tp 10 Ground reference for instruments
RECEIVER FUNCTION SELECTION SWITCH
Symbol Function
SW1 Position 1 = Barrier Alignment
Position 2 = Acquisition of: Channel Number, Value of Received Field
and indication of Alignment Quality
Position 3 = Acquisition and section parameters (thresholds
Read/write)
Position 4 = Normal Functionality, Walk-Test and indication of
alignment quality
RECEIVER SWITCHES TO SET THE WORKING-PARAMETERS
Symbol Function
SW4 Regulation of the anti-
masking control sensitivity (“0” = Low sensitivity,
“F” = High sensitivity, Default “8”)
SW5 Barrier Sensiti
vity regulation (“0” = Low sensitivity, F High Sensitivity,
Default “7”)
SW6 Type of answer of the barrier intrusion
(Default = “5”)
0 = Very High Decrease of Sensitivity
Use this for targets that are very big or very close to the Tx and
Rx heads.
(Big birds, cats that can jump near the heads ect.)
1 =High Decrease of Sensitivity
T argets that are big or very close to the Tx and Rx heads
2 = Medium Decrease of Sensibility
Targets that are big or very near to the heads Tx and Rx
3 = Decrease of Sensitivity
Targets that are big or very near to the heads Tx and Rx
4 = Decrease of Sensitivity Equal for every target
5 = Standard
6 = Increase of Sensitivity
Equal for every target
7 = Increase of Sensitivity for small targets
(crawling/rolling intruder)
8 = Medium increase of sensitivity for small targets
9 = High increase of Sensitivity
for small targets
RECEIVER NUMBER OF BARRIER SWITCHES SW2 SW3
N° Symbol Function
2
SW2 Barrier Number selector (units column)
3
SW3 Barrier Number selector (tens column)