Chungho Super Iguassu ICE 900, Техническое руководство, Страница: 24 / 56

Pr
oduct
Usa
ge
24
1
2
3
4
5
6
7
The ice making system of the IGUASSU ICE 500 automatically operates according to designed
program settings after applying power to the product.
If power is supplied to the product by inserting the power plug, then ice making automatically
operates without any manual setting.
if the level of purified water goes above proper operating levels, then all the ice created from the
machine will be automatically removed by deicing action.
In order to produce cold water, the compressor and circulation pump must operate properly.
(The cold water production process automatically operates according to designated programming.)
Cold water operation
This refers to an operation that makes cold water by continuously circulating and supplying
water into the cold water tank.
Water temperature in the cold water tank is automatically checked by the cold water
temperature sensor, and if it drops below the set temperature, then the cold water operation
will automatically stop.
If cold water production is operating properly, the ice making system will produce the ice according
to the given water supply.
Water supply action
To supply about .25G(1ℓ) of cold water every 50 seconds into ice making tray in order to make
ice.
Ice making action
To make ice by supplying cold refrigerant onto the ice tray as it is filled with water.
Harvest action
To an action to separate the ice which was made in the ice tray by supplying hot refrigerant
onto the tray.
When the ice storage is full, the ice detection sensor will automatically stop the process.
Cold temperature control is applied to prevent ice cubes from melting by periodically sending cold air
into ice storage.
If ice in the storage is not used for long periods of time, it may melt, and during ice dispensing,
small ice cubes can come out.
* TDSs(Total Dissolved Solids) of ice may increase according to the environment in which the ice is created.
Even at times ice making function is disabled, dispensing cold water operates as normal. •
The lower the surrounding temperatures, the shorter the ice making process will take and the higher the surrounding •
temperatures, the longer the ice making process will take.
Do not install or use the product in temperatures below 32°F(0°C) or above 100°F(38°C).
•
10-6 UNDERSTANDINg THE ICE MAKINg PROCESS AND OPERATION