Chungho Super Iguassu ICE 900, Техническое руководство, Страница: 19 / 56

10
Usage
19
10-1 DISPLAY (A)
10-2 WATER DISPENSINg & BUTTONS (B)
USB connection can be used to connect
diagnostic testing device or to charge USB
compatible electronic devices. (Note: Do
not charge more than 30 minutes.)
USB Port
Light Detection Sensor
ICE FULL
ICE FULL
WATER FULL
LOCK
HOT
COLD
AMBI
ICE
ICE
HOT
ECONO
CONST.
WATER FULL
HOT / ICE LOCK
LOCK LED
ICE MAKING LED
HOT/ECONO
HOT LED
ECONO LED
CONST.
CONST. LEDs
HOT (Hot Water Selection) Used to dispense hot water
Displays that hot water dispense was set (Red)
Used to dispense cold water
Used to dispense ambient water
Used to dispense ice
Displays that cold water dispense was set (Blue)
Displays that ambient water dispense was set (Blue)
Displays that ambient water dispensing ice (Red)
Used to dispense water into a container such as a cup after selecting the
desired water temperature among ambient water, cold water, and hot water
COLD (Cold Water Selection)
AMBI (Ambient Water Selection)
HOT LED
COLD LED
AMBI LED
Water Dispensing Button
ICE (Ice dispenser)
ICE LED
Detects amount of light around the unit,
thus enabling auto ON/OFF for hot water.
(when Econo function is set)
Lights up when ice storage house is full
(yellow green)
Lights up when water tank is full
(yellow green)
Used when setting/releasing the Lock
function
Lights up when setting the Lock function
(red)
Lights up when setting the Ice making
function (red)
Lights up when setting Hot water
operation (red)
Lights up when setting the each amount
of continuous water dispensing (red)
Lights up when Econo mode is on (red)
Used when setting/releasing continuous
water dispensing
Used when setting/releasing the hot
water & Economical mode ON/OFF