Chunc adapt, Руководство пользователя

Страница: 14 / 40

Page 14
Chunc Junior and Junior 45° setup (cont’d)
Safety note: A qualified health care professional should be present when fitting the Chunc
wheelchair and accessories to an occupant.
i
To make adjustments to the wheelchair’s setup, you may need to loosen a number of
indicated bolts, perform the adjustment and then re-tighten the bolts. An Allen key set is
located on the backrest to aid this.
Leg rest angle • : Adjust using bolts (G) on both brackets. With the orange snap-over clip
secured, slide the brackets up or down. Re-secure the bolts.
Junior 45° only : It may also be necessary to reposition the leg rest brace tube by removing
bolt (F - on previous page) on both sides and repositioning backwards or forwards.
Safety note: You should not perform this adjustment on an occupied wheelchair.
Footplate height • : Adjust using bolts (I).
Safety note: Placing excessive weight on the footplates could lead to damage and cause
the wheelchair to tip forwards.
Footplate adjustment • : Adjust angle using bolts (J) and tilt using bolts (K).
Harness mounting points
• : The wheelchair incorporates adjustable harness mounting
areas for positioning belts.
Lower harness mounting points
• : Adjustable positioning is available on the lower por-
tion of the backrest framework ( r ). The harness attachment tube (

) mounted to the
upper frame plate can also be repositioned along the upper frame by removing Nyloc
nut, repositioning to desired hole in frame and re-fastening.
Harness upper mounting point • : The upper mounting area (
o
) can be adjusted verti-
cally using bolts (L) on both sides.
Safety note: Ensure harnesses are fitted to the manufacturer’s instructions and their
adjustment monitored closely. Any adjustments should be as directed by a health care
professional and in accordance with the manufacturer’s instructions.
US customers only • : When used as a wheelchair anchored pelvic belt attachment,
ensure that any repositioning of the harness attachment tube (

) does not contravene
positional requirements as detailed in the safe transportation section of this manual.