Chunc adapt, Руководство пользователя

Страница: 25 / 40

Page 25
Accessory setup and use (continued)
Please refer to the product specification matrix at the back of this manual for accessory / model
availability.
Safety note: A qualified health care professional should be present when fitting the Chunc
wheelchair and accessories to an occupant.
i
To make adjustments to the accessory’s setup, you may need to loosen a number of
indicated bolts, perform the adjustment and then re-tighten the bolts. An Allen key set is
located on the wheelchair backrest to aid this.
Knee blocks
• :
Adjust general position using bolt (N) and reach individually using bolts (O). For angle •
adjustment, remove bolts (P), relocate pad cups to the appropriate holes and move the
cup assembly to new sideways position.
Removal and fitment: To remove, pull the lever located on the underside of the as-
•
sembly and withdraw the assembly from the wheelchair. To refit, align the 2 bars with
the knee block mount holes and push the bars in until they reach a stop. Push the lever
downwards until it clicks to secure firmly in place.
Height-adjustable armrests • :
To adjust height, use the bolt (R). •
The armrests may be removed using the orange collet. •
Swing-away foot rests • :
Refer to “Chunc Junior and Junior 45° setup” and “Everyday use” section. •
Spica wing support
• :
Adjust height using bolt (S). For lateral position and angle adjustment, remove cover •
and pad and use both bolts (T).
Harnesses • :
Refer to specific product setup sections and manufacture’s instructions. •