Chunc adapt, Руководство пользователя

Страница: 29 / 40

Page 29
Everyday use (continued)
Collet brackets • :
Armrests, the backrest and certain accessories can be removed with ease using the orange
collet caps. To free these components, unscrew the orange cap which allows them to be
drawn away from the wheelchair. To replace these components, insert the metal pole into
the bracket, locating the bolt head into the collect groove. Finally, screw the orange cap
down onto the bracket until it is fully secured.
Safety note: It is important that the components are checked before use to ensure they are
fixed securely in position. A caution label has been provided to remind attendants of this
procedure, and is located at the base of the backrest. Take care when performing this task,
as there is a potential finger trap between the orange cap and the locking lever.
Compacting for transport / storage • :
To transport or store, remove the back-
rest, both armrests and swing the footrest
under the chair. A minimum of two peo-
ple should only attempt to lift the main
assembly.
Safety note: Always apply the wheel locks
to prevent the chair from rolling. When an
unoccupied wheelchair is transported in
a vehicle, ensure all of its components are
securely fixed in position. This reduces the
risk of damage to the chair, and prevents
it from becoming a hazard in the event of
an accident.
Seat pan removal • :
Once the seat cushion has been removed, it is possible to remove the seat pan for clean-
ing etc. By pulling the front of the seat pan upwards, it will release from the wheelchair. To
replace the seat pan, align its holes with the orange seat pan brackets and press down to
snap into place.
Height adjustable handgrips • :
To adjust, twist the grip in an anti clockwise direction until the bracket slackens, allowing
the handlebar to slide up and down the backrest poles. To fix in position, twist the hand-
grip in a clockwise direction.
Safety note: Check the handgrips are fully secured before manoeuvring the wheelchair.
Upholstered parts
• : To remove, unzip or unhook Velcro fasteners and peel away from inner
core. For washing instructions, refer to care label attached to cover and / or “Cleaning”
section.
Safety note: The upholstered parts meet the European and U.S. standards for resistance to
flammability. However extreme care should always be exercised near open flames or with
burning cigarettes.
Everyday use continued overleaf...