Chrysler 2015 Town & Country Скачать руководство пользователя страница 92

Страница: 92 / 726

On the other hand, depending on the type and location of

impact, Advanced Front Air Bags may deploy in crashes

with little vehicle front-end damage but that produce a

severe initial deceleration.
Because air bag sensors measure vehicle deceleration

over time, vehicle speed and damage by themselves are

not good indicators of whether or not an air bag should

have deployed.
Seat belts are necessary for your protection in all colli-

sions, and also are needed to help keep you in position,

away from an inflating air bag.
When the ORC detects a collision requiring the Ad-

vanced Front Air Bags, it signals the inflator units. A large

quantity of non-toxic gas is generated to inflate the

Advanced Front Air Bags.
The steering wheel hub trim cover and the upper right

side of the instrument panel separate and fold out of the

way as the air bags inflate to their full size. The Advanced

Front Air Bags fully inflate in less time than it takes to

blink your eyes. The air bags then quickly deflate while

helping to restrain the driver and front passenger.

Knee Impact Bolsters

The Knee Impact Bolsters help protect the knees of the

driver and front passenger, and position the front occu-

pants for improved interaction with the Advanced Front

Air Bags.

WARNING!

•

Do not drill, cut, or tamper with the knee impact
bolsters in any way.

•

Do not mount any accessories to the knee impact
bolsters such as alarm lights, stereos, citizen band
radios, etc.

90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Содержание 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Town & Country

Отзывы:

Похожие инструкции для 2015 Town & Country

Бренды по названию

Популярные бренды

Chrysler 2015 Town & Country, Руководство пользователя

Результаты поиска

Содержание 2015 Town & Country

Отзывы:

Похожие инструкции для 2015 Town & Country

Бренды по названию

Популярные бренды