Chrysler 2015 Town & Country Скачать руководство пользователя страница 471

Страница: 471 / 726

selected. Push the button a second time to turn off the

Recirculation mode LED and allow outside air into the

vehicle.

NOTE:

In cold weather, use of the Recirculation mode

may lead to excessive window fogging. The Recirculation

mode is not allowed in Defrost mode to improve window

clearing operation. Recirculation will be disabled auto-

matically if this mode is selected.

Operating Tips

NOTE:

Refer to the chart at the end of this section for

suggested control settings for various weather condi-

tions.

Summer Operation

The engine cooling system must be protected with a

high-quality antifreeze coolant to provide proper corro-

sion protection and to protect against engine overheating.

OAT coolant (conforming to MS-12106) is recommended.

Refer to “Maintenance Procedures” in “Maintaining Your

Vehicle” for proper coolant selection.

Winter Operation

To ensure the best possible heater and defroster perfor-

mance, make sure the engine cooling system is function-

ing properly and the proper amount, type, and concen-

tration of coolant is used. Refer to “Maintenance

Procedures” in “Maintaining Your Vehicle” for proper

coolant selection. Use of the air Recirculation mode

during Winter months is not recommended, because it

may cause window fogging.

UNDERSTANDING YOUR INSTRUMENT PANEL 469

Содержание 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Town & Country

Отзывы:

Похожие инструкции для 2015 Town & Country

Бренды по названию

Популярные бренды

Chrysler 2015 Town & Country, Руководство пользователя

Результаты поиска

Содержание 2015 Town & Country

Отзывы:

Похожие инструкции для 2015 Town & Country

Бренды по названию

Популярные бренды