Chrysler 2015 Town & Country Скачать руководство пользователя страница 547

Страница: 547 / 726

NOTE:

It is particularly important for you to check the

tire pressure in all of your tires regularly and to maintain

the proper pressure.
The Basic TPMS consists of the following components:

•

Receiver Module

•

Four Tire Pressure Monitoring Sensors

•

TPMS Telltale Warning Light

Tire Pressure Monitoring Low Tire Pressure
Warnings

The “Tire Pressure Monitoring Telltale Light”

will illuminate in the instrument cluster, a

“LOW TIRE PRESSURE” message will display

in the instrument cluster, and an audible chime

will be activated when one or more of the four active

road tire pressures are low. Should this occur, you should

stop as soon as possible, check the inflation pressure of

each tire on your vehicle, and inflate each tire to the

vehicle’s recommended cold tire placard pressure value

(located on the placard label on the driver’s-side B-Pillar).

NOTE:

When filling warm tires, the tire pressure may

need to be increased up to an additional 4 psi (30 kPa)

above the recommended cold placard pressure in order

to turn the Tire Pressure Monitoring Telltale Light off.
The system will automatically update and the “Tire

Pressure Monitoring Telltale Light” will extinguish once

the updated tire pressures have been received.

NOTE:

The vehicle may need to be driven for up to 20

minutes above 15 mph (24 km/h) to receive this infor-

mation.
The “Tire Pressure Monitoring Telltale Light” will flash

on and off for 75 seconds, and remain on solid when a

system fault is detected. The system fault will also sound

a chime. If the ignition switch is cycled, this sequence will

STARTING AND OPERATING 545

Содержание 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Town & Country

Отзывы:

Похожие инструкции для 2015 Town & Country

Бренды по названию

Популярные бренды

Chrysler 2015 Town & Country, Руководство пользователя

Результаты поиска

Содержание 2015 Town & Country

Отзывы:

Похожие инструкции для 2015 Town & Country

Бренды по названию

Популярные бренды