Chrysler 2015 Town & Country Скачать руководство пользователя страница 131

Страница: 131 / 726

Front seat belt assemblies must be replaced after a

collision. Rear seat belt assemblies must be replaced after

a collision if they have been damaged (i.e., bent retractor,

torn webbing, etc.). If there is any question regarding seat

belt or retractor condition, replace the seat belt.

Air Bag Warning Light

The light should come on and remain on for

four to eight seconds as a bulb check when the

ignition switch is first turned ON. If the light is

not lit during starting, see your authorized

dealer. If the light stays on, flickers, or comes on while

driving, have the system checked by an authorized

dealer.

Defroster

Check operation by selecting the defrost mode and place

the blower control on high speed. You should be able to

feel the air directed against the windshield. See your

authorized dealer for service if your defroster is inoper-

able.

Floor Mat Safety Information

Always use floor mats designed to fit the footwell of your

vehicle. Use only floor mats that leave the pedal area

unobstructed and that are firmly secured so that they

cannot slip out of position and interfere with the pedals

or impair safe operation of your vehicle in other ways.

WARNING!

Pedals that cannot move freely can cause loss of
vehicle control and increase the risk of serious per-
sonal injury.

•

Always make sure that floor mats are properly
attached to the floor mat fasteners.

(Continued)

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 129

Содержание 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Town & Country

Отзывы:

Похожие инструкции для 2015 Town & Country

Бренды по названию

Популярные бренды

Chrysler 2015 Town & Country, Руководство пользователя

Результаты поиска

Содержание 2015 Town & Country

Отзывы:

Похожие инструкции для 2015 Town & Country

Бренды по названию

Популярные бренды