Chrysler 2015 Town & Country Скачать руководство пользователя страница 489

Страница: 489 / 726

When the Fuel Economy (ECON) Mode is engaged, the

vehicle control systems will change the following:

•

The transmission will upshift sooner and downshift

later.

•

The transmission will skip select gears during shifts to

allow the engine to operate at lower speeds.

•

The torque converter clutch may engage at lower

engine speeds and remain on longer.

•

The engine idle speed will be lower.

•

The overall driving performance will be more conser-

vative.

•

Some ECON mode functions may be temporarily

inhibited based on temperature and other factors.

Six-Speed Automatic Transmission

The transmission gear position display (located in the

instrument cluster) indicates the transmission gear range.

You must press the brake pedal to move the shift lever

out of PARK (Refer to “Brake/Transmission Shift Inter-

lock System” in this section). To drive, move the shift

lever from PARK or NEUTRAL to the DRIVE position.

Fuel Economy Mode Switch

STARTING AND OPERATING 487

Содержание 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Town & Country

Отзывы:

Похожие инструкции для 2015 Town & Country

Бренды по названию

Популярные бренды

Chrysler 2015 Town & Country, Руководство пользователя

Результаты поиска

Содержание 2015 Town & Country

Отзывы:

Похожие инструкции для 2015 Town & Country

Бренды по названию

Популярные бренды