Chrysler 2015 Town & Country Скачать руководство пользователя страница 362

Страница: 362 / 726

next to the feature showing the system has been activated

or the check-mark is removed showing the system has

been deactivated. Refer to “Keyless Enter-N-Go™” in

“Things To Know Before Starting Your Vehicle”.

Easy Exit Seat

This feature provides automatic driver seat positioning to

enhance driver mobility when entering and exiting the

vehicle. To make your selection, push and release the

SELECT button until a check-mark appears next to the

feature showing the system has been activated or the

check-mark is removed showing the system has been

deactivated.

NOTE:

The seat will return to the memorized seat

location (if Recall Memory with Remote Key Unlock is set

to ON) when the RKE transmitter is used to unlock the

door. Refer to “Driver Memory Seat” in “Understanding

The Features Of Your Vehicle” for further information.

Tilt Mirror In Reverse — If Equipped

When this feature is selected and the vehicle is placed in

a reverse gear, the driver’s side mirror will tilt downward

to allow the driver to see into the previous blind spot and

avoid objects in close proximity to the rear of the vehicle.

To make your selection, push and release the SELECT

button until a check-mark appears next to the feature

showing the system has been activated or the check-mark

is removed showing the system has been deactivated.

Blind Spot Alert — If Equipped

There are three selections when operating Blind Spot

Alert (“Blind Spot Alert Lights”, “Blind Spot Alert

Lights/CHM”, “Blind Spot Alert Off”). The Blind Spot

Alert feature can be activated in “Blind Spot Alert Lights”

mode, when this mode is selected the Blind Spot Monitor

(BSM) system is activated and will only show a visual

alert in the outside mirrors. The Blind Spot Alert feature

can be activated in “Blind Spot Alert Lights/CHM”

360 UNDERSTANDING YOUR INSTRUMENT PANEL

Содержание 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Town & Country

Отзывы:

Похожие инструкции для 2015 Town & Country

Бренды по названию

Популярные бренды

Chrysler 2015 Town & Country, Руководство пользователя

Результаты поиска

Содержание 2015 Town & Country

Отзывы:

Похожие инструкции для 2015 Town & Country

Бренды по названию

Популярные бренды