Chrysler 2007 Town and Country Скачать руководство пользователя страница 397 | Manualshive

Страница: 397 / 504

Chrysler 2007 Town and Country Скачать руководство пользователя страница 397

Jacking Instructions — Non Stow ’n Go Seating

1. Loosen (but do not remove) the wheel lug nuts by
turning them to the left one turn while the wheel is still
on the ground.

2. Fit the jack handle over the drive nut. Rotate the nut to
the left until the spare is on the ground with enough slack
cable to allow you to pull the tire out from under the
vehicle.

CAUTION!

The winch mechanism is designed for use with the
jack handle only. Use of an air wrench or other
power tools is not recommended and can damage the
winch.

3. When the spare is clear, tilt the retainer at the end of
the cable and pull it through the center of the wheel.

4. There are two jack engagement locations on each side
of the body — refer to the following illustration.

WHAT TO DO IN EMERGENCIES

397

6

«
...
395
396
397
398
399
...
»

Содержание 2007 Town and Country

























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов