Chrysler 2007 Town and Country Скачать руководство пользователя страница 181

Страница: 181 / 504

Security

If you sell your vehicle, be sure to erase the frequencies
by following the “Erasing HomeLink Buttons” instruc-
tions in this section.

This device complies with part 15 of FCC rules and with
RSS-210 of Industry Canada. Operation is subject to the
following conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference that may be
received including interference that may cause undes-
ired operation.

NOTE:

Changes or modifications not expressly ap-

proved by the party responsible for compliance could
void the user’s authority to operate the equipment.

HomeLink

威

is a trademark owned by Johnson Controls,

Inc.

In the event that you are still having programming
difficulties, questions, or comments, contact HomeLink
at:

www.homelink.com or 1-800-355-3515

POWER SUNROOF — IF EQUIPPED

The power sunroof control is located between the sun
visors on the overhead console.

Power Sunroof Controls

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

181

Содержание 2007 Town and Country

























































































































































































































































































































































































































































































































Результаты поиска

Содержание 2007 Town and Country

Отзывы:

Похожие инструкции для 2007 Town and Country

Бренды по названию

Популярные бренды

Chrysler 2007 Town and Country, Руководство пользователя

Результаты поиска

Содержание 2007 Town and Country

Отзывы:

Похожие инструкции для 2007 Town and Country

Бренды по названию

Популярные бренды