Chrysler 2007 Town and Country Скачать руководство пользователя страница 251 | Manualshive

Страница: 251 / 504

Chrysler 2007 Town and Country Скачать руководство пользователя страница 251

Press the AUDIO button a fourth time and FADE will be
displayed. Press the SEEK + or SEEK – to adjust the
sound level between the front and rear speakers.

Press the AUDIO button again or wait 5 seconds to exit
setting tone, balance, and fade.

AM/FM Selection

Press the AM/FM button to change from AM to FM. The
operating mode will be displayed next to the station
frequency. The display will show ST when a stereo
station is received.

Time

Press the TIME button to change the display between
radio frequency and time.

General Information

This radio complies with Part 15 of FCC rules and with
RSS-210 of Industry Canada. Operation is subject to the
following conditions:

1. This device may not cause harmful interference,

2. This device must accept any interference received,
including interference that may cause undesired opera-
tion.

NOTE:

Changes or modifications not expressively ap-

proved by the party responsible for compliance could
void the user’s authority to operate the equipment.

CD Player Operation

NOTE:

The ignition switch must be in the ON or ACC

position and the volume control ON before the CD player
will operate.

UNDERSTANDING YOUR INSTRUMENT PANEL

251

4

«
...
249
250
251
252
253
...
»

Содержание 2007 Town and Country

























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов