Chrysler 2007 Town and Country Скачать руководство пользователя страница 150 | Manualshive

Страница: 150 / 504

Chrysler 2007 Town and Country Скачать руководство пользователя страница 150

inches (30 cm) and then drop it. This should secure both
latches. Never drive your vehicle unless the hood is fully
closed, with both latches engaged.

WARNING!

If the hood is not fully latched, it could fly up when
the vehicle is moving and block your forward vision.
You could have a collision. Be sure all hood latches
are fully latched before driving.

LIGHTS

All of the lights, except the hazard warning lights, are
controlled by switches to the left of the steering column
on the instrument panel.

Interior Lights

Interior lights are turned on when a door or liftgate is
opened, the keyless entry transmitter is activated, or
when the dimmer control is moved to the extreme top.

The interior lights will automatically turn off in about 15
minutes if any of the following occur.

Headlight Switch

150

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
148
149
150
151
152
...
»

Содержание 2007 Town and Country

























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов