Chrysler 2007 Town and Country Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 504

Chrysler 2007 Town and Country Скачать руководство пользователя страница 38

•

When the child lock system is engaged the door can be
opened only by using the outside door handle, remote
keyless entry transmitter, switches on the overhead
console or the switches located on the trim panel just
in front of the power sliding door, even though the
inside door lock is in the unlocked position.

•

The power sliding door will operate from the switches
located on the trim panel just in front of the power
sliding door, regardless of the child lock lever position.

To avoid unintentional operation of the power slid-
ing door from the rear seats, press the button located
in the overhead console to disable the switches for
the rear seat passengers.

WARNING!

To avoid trapping anyone in the vehicle in a colli-
sion. Remember that the sliding doors can only be
opened from the outside door handle or the switches
located on the trim panel just in front of the power
sliding door when the child protection locks are
engaged.

To Disengage the Child Protection Door Lock

1. Open the sliding door.

2. Insert the tip of the vehicle’s ignition key (or any alike
item) into the child lock control and slide it sidewards.

3. Repeat Steps 1 and 2 on the opposite sliding door (if
equipped).

38

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
36
37
38
39
40
...
»

Содержание 2007 Town and Country

























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов