Chrysler 2007 Town and Country Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 504

Chrysler 2007 Town and Country Скачать руководство пользователя страница 30

Auto Unlock On Exit Programming — If Equipped

The doors will unlock automatically on vehicles with
power door locks if:

1. Enter your vehicle and close all doors.

2. Fasten your seat belt (fastening the seat belt will cancel
any chimes that may be confusing during this program-
ming procedure).

3. Insert the key into the ignition.

4. Within 15 seconds, cycle the key from the LOCK
position to the ON/RUN position a minimum of four
times ending in the LOCK position

(do not start the

engine)

.

5. Within 30 seconds, press the driver’s door lock switch
in the UNLOCK direction.

6. A single chime will sound to indicate the feature has
been changed.

7. Repeat the above steps to alternate the availability of
this feature.

8. If a chime is not heard, program mode was canceled
before the feature could be changed. If necessary repeat
the above procedure.

The Auto Unlock On Exit feature can be enabled or
disabled by performing the procedure in the Electronic
Vehicle Information Center (EVIC), Customer Program-
mable Features section on vehicles so equipped.

NOTE:

Use the Auto Door Locks and Auto Unlock

features in accordance with local laws.

30

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
28
29
30
31
32
...
»

Содержание 2007 Town and Country

























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов