Christopeit Sport 9841, Инструкция по сборке и использованию

Страница: 11 / 28

- 11 -
English
Assembly Instructions
Before beginning assembly, be sure to observe our
recommendations and safety instructions. Some parts are pre
assembled.
Step 1:
Place the seat on the floor and attach the main frame (2) onto the
padding (3) by using the screws M6x16 (17).
Step 2:
Place the foot (7) into the foot tube holder (1) and attach the cross
bar (4) at foot tube holder (1) in desired position and secure with
knurled grip nut (11). Slide a round padded section (10) and a grip
pad (18) on both ends of cross bar (4).
Step 3:
Place the main frame (2) into the holder of foot tube holder (1) and
screw them together by using screw M8x55 (13) washer (15) and
self locking nut (14). With safety pin (12) you have to secure the
bench fold up and assembled position.
(Attention: Please be careful, if you fold up the bench.)
Step 4:
Now attach the Round padded section locator (5) onto the foot tube
holder (1) and secure with knurled grip nut (11). Slide a Round padded
section (10) on both ends of Round padded section locator (5).