Christie TruLife+, Техническое описание

Страница: 14 / 25

# Status State Value Description
Power.Standby Lasers will start getting ready to turn on
when the lasers have cooled down
sufficiently.
Power.Halt A critical hardware issue exists. The
laser subsystem remains off until the
issue is resolved and the system s AC
power cycled.
105 CSB DAC Calibration OK The color sensor board (CSBD) DAC
calibration exists.
107 LiteLOC Sensor to
Screen Calibration
OK LiteLOC sensor-to-screen calibration
exists.
Achieve additional
performance by performing
Sensor to Screen calibration LiteLOC sensor-to-screen calibration
does not exist.
108 LiteLOC LOS to Sensor
Calibration
OK LiteLOC LOS-to-screen calibration exists.
109 LaserCrossPlugDetect OK Lasers are wired correctly.
<description of failure> Lasers are wired incorrectly and cannot
power on.
110 Laser Reds <value> Displays the health status of the red
lasers.
111 Laser Greens <value> Displays the health status of the green
lasers.
112 Laser Blues <value> Displays the health status of the blue
lasers.
113 Laser Tecs <value> Displays the health status of the TECs.
114 Laser Cold Plate Temp <value>°C Displays the temperature inside the LOS.
<value>°C Temperature exceeds the warning
threshold.
115 Laser LOS Temp <value>°C Displays the temperature inside LOS.
<value>°C Temperature exceeds the warning
threshold.
116 Laser LOS Humidity <RH value> % Displays the humidity in the LOS.
<RH value> % Humidity exceeds the warning threshold.
Christie status system
Christie Technical Reference–Status System 14
020-103327-03 Rev. 1 (04-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.