Christie TruLife+, Техническое описание

Страница: 6 / 25

# Status State Value Description
• A negative pitch means that the
projector is pointing down.
• A negative roll means the projector
is tilted counter clockwise as seen
from the rear.
Communication Fault Information is not available due to a
hardware fault.
5
6
7
8 Lens Motor Horizontal-Axis
Lens Motor Vertical-Axis
Lens Motor Zoom- Axis
Lens Motor Focus- Axis Calibrating Currently calibrating the lens motor.
Calibrated Properly calibrated the motor range.
Unknown The status of the motor is unknown
because a problem occurred in the
upstream communication path.
Uncalibrated The range for the current lens has not
been determined and/or the reported
position on the axis may be inaccurate.
Failed During reset or calibration, an error was
detected related to the motor and/or
sensor.
9 Built-In Self Test N/A The built-in self test has not been
executed yet.
Passed The built-in self test completed
successfully.
Failed The built-in self-test failed.
10 System ID Board OK Properly detected and initialized the
device.
Unknown Cannot determine the status of the
device.
Communication Fault Cannot communicate with the device.
Invalid Data The information on the device is missing
or corrupted.
11 Housekeeping Board OK Properly detected and initialized the
device.
Unknown Cannot determine the status of the
device.
Communication Fault The device failed to respond or provided
a bad response to a command while the
light source is on.
Christie status system
Christie Technical Reference–Status System 6
020-103327-03 Rev. 1 (04-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.