Christie TruLife+, Техническое описание

Страница: 7 / 25

# Status State Value Description
The projector remains on until AC power
is removed, even if this warning
condition is fixed.
Detection Fault Cannot read the device hardware
information.
Initialization Fault Cannot properly initialize the device.
Communication Fault The device failed to respond or it
provided a bad response to a command
while the projector is in standby mode.
12 Keypad Display Auto Detect The projector is attempting to detect the
presence of the keypad display device.
Programming Programming the device with the correct
firmware.
OK Properly detected and initialized the
device.
Detection Fault Cannot detect the keypad display device.
Unexpected Behavior The device is not responding correctly.
Upgrade Failed The device failed to upgrade properly.
13 Power Supply OK Detected the power supply and the
output stage is on.
Off The power supply output stage is off.
Unknown Cannot determine the status of the
power supply due to an upstream
communication fault.
Communication Fault Cannot detect the power supply due to a
communication failure.
Failed A non-catastrophic error occurred. See
the logs for more information.
Overtemperature The power supply reports a High-Temp
alarm but no fan failure is reported.
Upgrade Failed Failed to upgrade the power supply.
Failed A fatal power supply error occurred. See
the logs for more information.
AC Input Failure The power supply suffered from an input
failure.
Christie status system
Christie Technical Reference–Status System 7
020-103327-03 Rev. 1 (04-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.