Christie MIRAGE DS+10K-M, Руководство по установке

Страница: 62 / 72

6-8 Mirage M Series Setup Guide
020-100592-02 Rev. 1 (11-2010)
Section 6: Specifications
6.4.3 Dual Link DVI Input
6.4.4 Video Decoder Input
6.4.5 Dual SD/HD-SDI
6.5 Control Signal Compatibility
6.5.1 Projector Control
Connectors 1 dual link DVI-I, 300MHz
Supports: DVI-D (dual link), DVI-D (single link),
DVI-A* (analog), DHCP (with appropriate HDMI
adaptor cable)
1 analog 15-pin VGA*
*Supports monoscopic-only signals under 165MHz.
The VGA connector can be used for Dual Input 3D
mode. Only one input can be used at a time on this
input module.
Color spaces/signal types RGB, YPbPr, HDCP
A/D conversion 8 bit DVI-D, 10 bit HDMI
Frequency 330MHz, DVI-D (dual link) 165MHz DVI-D
(single link) and analog.
Connectors 2 S-Video 4-pin miniature DIN
4 BNC, 75 Ohm
2 independent decoder channels for PIP
Color space/Signal types Composite video
Component video (SD and ED only)
S-video
Video Standards NTSC, NTSC 4.43, PAL, PAL M, PAL N, PAL 60,
SECAM
A/D conversion 10 bits
Connectors BNC, 75 Ohm
Color spaces/signal types Dual HD input
SDI, HDSDI
Number of transmitters 2 IR
Modulation frequency Dual frequency (38 kHz, 455 kHz)
Wavelength (peak intensity) 950 nm
Range Min 35 m
Wired Keypad
Wire connection (option) 3 pin XLR
Max cable length 30 m
XLR Connections Optional boot for remote with XLR connector built-
in to avoid requirement to use phono-to-XLR
adaptor cable