Christie MIRAGE DS+10K-M, Руководство по установке

Страница: 29 / 72

Section 3: Operation
Mirage M Series Setup Guide 3-7
020-100592-02 Rev. 1 (11-2010)
Function Key
IF WITHIN A NUMERIC FIELD IN A MENU : Use
F
UNC
to enter a negative number.
IF WITHIN A TEXT FIELD: Press
F
UNC
followed by the
U
P
A
RROW
K
EY
or
D
OWN
A
RROW
K
EY
to convert
between capital and lower case letters. Press
F
UNC
followed by the
L
EFT
A
RROW
K
EY
or
R
IGHT
A
RROW
K
EY
to
insert or delete a character. Press
F
UNC
followed by
E
NTER
to delete all characters.
IF WITHIN A PRESENTATION: Press
F
UNC
followed by two numeric
numbers to enable a specific color or colors in the display (see right). For
example, will display only red, and will display
green data. Eliminating one or more colors can help with certain diagnostics
and setups, such as when accurately overlaying one image on top of another
from stacked projectors.
NOTE:
Color enabling can also be implemented
from numerous locations within the menu system.
Press
F
UNC
followed by
H
ELP
to disable Keystone , Edge Blending and
Brightness Uniformity settings. This will disable the features without
changing the settings associated with them.
Projector
Press
P
ROJ
to access a specific projector within a group of projectors or to confirm if the local projector is
listening. The number in the “Enter Number” window indicates which projector is currently listening to
commands, and will match the projector number that has been defined in the
Menu Preferences menu.
The
P
ROJ
check box (read-only) shows whether or not the projector physically connected to a keypad is
listening to commands from that keypad. A checkmark means that connected projector is listening; if there is
no checkmark, you are communicating with a different projector.
To control a specific projector with the keypad, press
P
ROJ
and then enter the three-digit number assigned to
the projector you want to use. If you switch to a projector other than the one you are currently using, the
checkmark will disappear.
To broadcast to multiple projectors, press
P
ROJ
and then
P
ROJ
again without entering a projector number.
Keypad commands will then effect all projectors present.
NOTE:
There is no method of controlling a group of
projectors within the same wired configuration using the wired keypad exclusively, since there is only one
wired protocol available
.
NOTE:
The projector’s address can be set in the Configuration Menu>
Communications Submenu.
Enter
Press
E
NTER
to select a highlighted item, to toggle a check box, or to accept a parameter adjustment and return
to the previous menu or image.
Exit
Press
E
XIT
to return to the previous level, such as the previous menu.
NOTE:
E
XIT
does not save changes within
text editing boxes (including number editing of a slide bar value) or within pull-down lists. It acts as a
“cancel” in these cases.
Arrow Keys
Use the
L
EFT
/R
IGHT
A
RROW
K
EY
to change a slide bar value or to select a different option within a pull-down
list without having to first scroll through options or navigate within a menu, pull-down list or text box.
F
IGURE
3-3 FUNCTION KEY