Christie MIRAGE DS+10K-M, Руководство по установке

Страница: 13 / 72

Mirage M Series Setup Guide 2-1
020-100592-02 Rev. 1 (11-2010)
2 Installation and Setup
2.1 Projector Quick Setup and Installation
The following instructions are for those preferring a quick setup. Refer to the remaining subsections for
detailed setup instructions.
Always power down the projector and disconnect all power sources before servicing or
cleaning.
Refer to Safety Warnings and Guidelines in
Section 4 Maintenance
.
STEP 1 - Installing a Projection Lens
The projection lens, shipped separately from the projector, must be installed prior to setting up the projector.
Remove the lens plug from the lens opening in the projector before installing the lens.
Retain the lens plug for projector transportation to protect the projector’s optical
components from dust and debris.
IMPORTANT!
The lens seals the projector, preventing contaminants from entering the interior of the
projector. Never operate a projector without a lens.
LENS INSTALLATION
IMPORTANT!
Remove the rear lens cap from the lens. Keep the front lens cap on the lens to protect it
during installation.
1. Rotate the lens clamp to the OPEN position, see Figure 2-1 .
F
IGURE
2-1 L
OCKING
C
LAMP
O
PEN