Christie MIRAGE DS+10K-M, Руководство по установке

Страница: 58 / 72

6-4 Mirage M Series Setup Guide
020-100592-02 Rev. 1 (11-2010)
Section 6: Specifications
6.1.14 Picture Centering (with 1.4-1.8:1 HD lens)
6.2 Feature Set
6.2.1 Airflow
6.2.2 Air Filters (Optional)
6.2.3 Dust Sealing
6.2.4 ILS (Intelligent Lens System)
6.2.5 Projection Lens Compatibility
HD (1920x1080p) centering error ±5% of vertical offset (±32 pixels)
SXGA+ centering error ±5% of vertical offset (±26 pixels)
WUXGA centering error ±5.5% of vertical offset (±32 pixels)
Air intakes Right side of projector
Air exhaust Hot lamp exhaust: rear of projector
Cool light engine exhaust: left side of projector
Filter media types
Coarse foam filter
Fog filter
Filter access Service-interchangeable via access panel
Dust sealed DMDs Gasket sealed
Dust sealed illumination system Sealed from lamp input to entrance face of prism
when lamps are installed
Motorized lenses and lens mount with position
encoding Zoom, focus, horizontal and vertical offsets
Accuracy ±2 pixel
Manual control 1/3 pixel fine movement control per button press on
any applicable User Interface (e.g., remote).
Calibration
User Configurable Calibration Modes Automatic calibration on lens change detection
Automatic calibration on power-up
Manual calibration
Calibration time < 10 secs when required
Bore sight 3-point +- 4 degrees adjustment and lockable
without removing covers
Travel time to stop
Zoom and Focus
10 sec nominal (depends on lens type)
Offsets 5 sec (nominal (depends on lens type)
Manual Lens Movement Manual over-ride permissible for zoom and focus
Lens type Reverse Telecentric Internal-focus
Motorized zoom and focus with position feedback
NOTE: Calculated Throw distance values are subject to a ±5% lens tolerance