Christie Mirage 304K, Инструкция по установке и настройке

Страница: 39 / 68

Input configuration Description Requirements
Two-Port Dual Input 3D May be used for Dual-Input 3D configurations. Four TDPIC cards or one
QDPIC card
One-Port Enables connection of one DisplayPort cable to a TDPIC
card or one QDPIC card. In this configuration the
DisplayPort input supplies the entire video raster. One TDPIC card or one
QDPIC card
One-Port, Dual-Input 3D May be used for Dual-Input 3D configurations. One TDPIC card or one
QDPIC card
This card may or may not be included with your model. Standard inputs are subject to change.
Connecting a video source using HDMI
The Twin HDMI input card (THIC) accepts digital video data from HDMI sources.
Part number: 108-311101-XX
The port configurations listed below are supported.
Input configuration Description Requirements
Four-Port Enables connection of four HDMI cables to two THIC cards.
Each HDMI input supplies one quadrant or column of a 4K
input image. This configuration supports high resolution and
high frame rate input video streams. Two THIC cards
Four-Port, Dual-Input 3D May be used for Dual-Input 3D configurations. Four THIC cards
One-Port Enables connection of one HDMI cable to the 1-IN input of a
THIC card (in any slot). In this configuration, the HDMI input
supplies the entire video raster. One THIC card
One-Port, Dual-Input 3D May be used for Dual-Input 3D configurations. One THIC card
Connecting devices and establishing communication
Mirage 304K (Bm.1) Installation and Setup Guide 39
020-102013-12 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.