Christie Mirage 304K Скачать руководство пользователя страница 24

Страница: 24 / 68

LED

State

Description

Flashing

Cool down

Projector is moving to one of the two standby
states:

• Light source is off and video electronics are

booting up.

• Light source is off. Video electronics and light

source is cooling down.

Green

Solid

Light source on Light source is on. Projector status is OK.

Flashing

Startup

Projector is moving to light source on state. Light
source is warming up. Video electronics are
initializing.

Yellow

Solid

Warning in
standby

Projector is in standby state. A problem exists with
the projector that does not prevent it from
operating.

Flashing yellow/green

Warning during
startup

Projector is in a startup state. A problem exists
with the projector that does not prevent it from
operating.

Flashing

Warning with
light source on

Light source is on. A problem exists with the
projector that will not cause it to shut down.

Flashing yellow/blue

Warning during
cool down

Projector is in a cool down state. Light source is off.
Video electronics and light source are cooling
down. A problem exists with the projector that
does not prevent it from operating.

Red

Solid

Error in
standby

Projector is in standby. An error exists that
prevents the projector from starting up.

Flashing

Error

An error with the projector exists during startup,
cool down, or when the light source is off. Projector
will proceed to shut down.

Off

AC off

The AC power is off.

Projector LED shutter indicators

Identify the shutter LED state colors and meaning.

LED

State

Description

Solid magenta

Shutter closed

The shutter is closed.
In standby, the shutter is always automatically closed and
the magenta light is muted.

Off

Shutter open

The shutter is open.

Installation and setup

Mirage 304K (Bm.1) Installation and Setup Guide

020-102013-12 Rev. 1 (09-2022)

If printed, please recycle this document after use.

Содержание Mirage 304K





































































Результаты поиска

Содержание Mirage 304K

Отзывы:

Похожие инструкции для Mirage 304K

Бренды по названию

Популярные бренды

Christie Mirage 304K, Инструкция по установке и настройке

Результаты поиска

Содержание Mirage 304K

Отзывы:

Похожие инструкции для Mirage 304K

Бренды по названию

Популярные бренды