Christie Mirage 304K, Инструкция по установке и настройке

Страница: 20 / 68

Display panel components
Identify the main components of the display panel (also known as the home page).
ID Component Description
A Status Contains information about the health of the projector including
the number of warnings and errors.
Provides access to the status system.
B IP Settings Displays the IP address and subnet values.
Provides access to changing the IP settings.
C Test Pattern Displays the currently selected test pattern. If no test pattern is
selected, Off is displayed.
Provides access to the list of test patterns.
D Input Displays the signal for the currently selected input.
Provides access to the list of input signals.
E Power and Temperature Indicates the incoming voltage, measured in Volts, and intake
temperature, measured in Celsius.
F Lamp Hours Displays the state of the lamps and the number of hours used.
G Projector and Component
Controls Indicates the states of the projector and its components.
H Projector Information Provides information about the projector such as the projector
name, serial number, software version, and projector ID.
Installation and setup
Mirage 304K (Bm.1) Installation and Setup Guide 20
020-102013-12 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.