Christie LW502, Руководство пользователя

Страница: 51 / 127

49
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
Operating
Press any button to select an input port on the remote control or press the
INPUT
button on the control panel. A dialog box to select the input signal for
the main area is displayed. Choose a signal using the ▲/▼ buttons. To change
the signal in the sub area, switch temporarily across to the main area with the
◄/► buttons.
Displaying the same signal on the both areas is not allowed. Refer to the table
for details on available input signal combinations. Any combinations marked
with "X" cannot be selected.

Changing the picture input signal
Sub area
Main area
COMPUTER IN LAN HDMI 1 HDMI 2 HDBaseT VIDEO
COMPUTER IN
X X O O O X
LAN
X X X X X X
HDMI 1
O X X O X O
HDMI 2
O X O X O O
HDBaseT
O X X O X O
VIDEO
X X O O O X
main area sub area
• The combined input signals marked with an "O" can be selected and
displayed in the PbyP / PIP mode even when the port is set to SKIP with the
SOURCE SKIP on the OPTION menu (

82
).
NOTE
Input signal
PbyP (Picture by Picture) / PIP (Picture in Picture) (continued)
PbyP mode
(continued on next page)
main area
sub area
Input signal
PIP mode