Christie LW502 Скачать руководство пользователя страница 28

Страница: 28 / 127

LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)

Setting up

►Use extra caution when connecting the power cord, as

incorrect or faulty connections may result in fire and/or electrical shock.

• Do not touch the power cord with a wet hand.

• Only use the power cord that came with the projector. If it is damaged, consult

your dealer to get a new one. Never modify the power cord.

• Only plug the power cord into an outlet whose voltage is matched to the power

cord. The power outlet should be close to the projector and easily accessible.

Remove the power cord for complete separation.

• Do not distribute the power supply to multiple devices. Doing so may overload

the outlet and connectors, loosen the connection, or result in fire, electric shock

or other accidents.

• Connect the ground terminal for the AC inlet of this unit to the ground terminal

of the building using an appropriate power cord (bundled).

• This projector is also designed for IT power systems with a phase-to

phase voltage of 220 to 240 V.

WARNING

NOTICE

Connecting power supply

Put the connector of the power

cord into the

(AC inlet) of

the projector.

Firmly plug the power cord’s plug into the

outlet. In a couple of seconds after the power

supply connection, the

POWER

indicator

lights up in steady orange.

When the DIRECT POWER ON function activated, the connection of the power

supply makes the projector turn on.

Power

cord

Содержание LW502
































































































































Результаты поиска

Содержание LW502

Отзывы:

Похожие инструкции для LW502

Бренды по названию

Популярные бренды

Christie LW502, Руководство пользователя

Результаты поиска

Содержание LW502

Отзывы:

Похожие инструкции для LW502

Бренды по названию

Популярные бренды