Christie Griffyn 4K50-RGB, Инструкция по установке и настройке

Страница: 75 / 86

Index list for the input channel
the following table provides the index information for the input channel.
Not all options listed in the table are available. Available options depend on the Video Input configuration
option selected: Default or SDVoE.
Input
index Description
0 One-port HDMI01
1 One-port HDMI2
2 One-port HDBaseT
3 One-port DisplayPort1
4 One-port DisplayPort2
5 N/A
6 One-Port SDI1
7 One-Port SDI2
8 One-Port SDI3
9 One-Port SDI4
10 N/A
11 One-Port SDVoE
12 Christie Link A
13 Christie Link B
21 Two-Port DisplayPort
22 Four-Port SDI
Configuring the 3D Sync in/3D Sync out interface
The 3D sync interface is supported for 3D-enabled projectors. A Mirage license is required.
The projector can configure the 3D output sync port to supply an output synchronized right eye/left
eye signal for:
• Another projector
• 3D glasses emitter
The 3D sync input and output interface connector is a micro 75 ohm BNC connector.
Configuring the RS232 port
Configure the RS232 port to send Christie serial commands using a standard RS232 serial cable.
For more information, on the serial commands, see the Christie Serial Commands Guide
(P/N: 020-103316-XX) .
Connecting devices and establishing communication
Christie Griffyn Series Installation and Setup Guide 75
020-103314-08 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.