Display panel components
Identify the main components of the display panel (also known as the home page).
ID
Component
Description
A
Projector Information
Provides information about the projector such as the projector
name, serial number, software version, and projector ID.
B
Projector and Component
Controls
Indicates the states of the projector and its components.
C
Power and Temperature
Indicates the light source mode, power mode, and intake
temperature.
D
Status
Contains information about the health of the projector including
the number of warnings and errors.
Provides access to the status system.
E
IP Settings
Displays the IP address and subnet values.
Provides access to changing the IP settings.
F
Test Pattern
Displays the currently selected test pattern. If no test pattern is
selected, Off is displayed.
Provides access to the list of test patterns.
G
Input
Displays the signal for the currently selected input.
Provides access to the list of input signals.
IR/wired remote keypad
The IR/wired remote keypad controls the projector by way of either wireless communications from a
battery-powered infrared (IR) transmitter or a wired interface.
To use the IR remote, direct the keypad toward the projector’s front or rear IR sensor and press a
function key. One of the two IR sensors on the projector detect the signal and relay the commands for
internal processing. The remote also offers a connector for wired connections to the projector.
Installation and setup
Christie Griffyn Series Installation and Setup Guide
26
020-103314-08 Rev. 1 (06-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Содержание Griffyn 4K50-RGB
Страница 1: ...Installation and Setup Guide 020 103314 08 Christie Griffyn Series...
Страница 86: ......