Christie CP2230, Руководство по обслуживанию

Страница: 103 / 150

Section 5: Parts and Module Replacement
CP2230 Service Manual 5-43
020-100562-06 Rev. 1 (05-2016)
5.13.8 Main Blower Vane Switch
The Main Blower Vane Switch is located on the bracket that supports the Main AC Blower.
(Estimated Replacement Time: 14 m 10 minute LampLOC™ Alignment)
1. Remove the rear right skin. Refer to 5.5.3 Rear Right Skin
(ignitor/blower compartment), on page 5-7 .
2. Remove the black and red leads. ( Figure 5-62 )
3. Using a 3/32” hex key, remove the two screws securing
the switch to the bracket.
4. Remove the switch from the bracket.
5. When installing, repeat instructions in reverse. Once
installed, perform LampLOC
™
alignment. For details,
refer to 3.3 Adjusting Lamp Position (LampLOC™), on
page 3-3 .
Figure 5-62 Blower Switch Leads