Christie Boxer 4K Скачать руководство пользователя страница 50

Страница: 50 / 51

Asynchronous

messages

The projector can generate some asynchronous messages.
The following lists examples of each message, including why and when they are generated. Bolded
and underlined text indicates a fixed part of the message.

Type

Message

Description

Card
Detected

(65535 00000 FYI01901 "Card x
detected")

Triggered when a new card is detected in slot X
while the video electronics are already on.

Card
Removed

(65535 00000 FYI01901 "Card x
removed")

Triggered when a card is removed from slot X
while the video electronics are on.

Date/Time

(65535 00000 FYI00916 "Setting Date to
2015/05/20")

Generated when the date or time are changed,
respectively.

(65535 00000 FYI00916 "Setting Time to
00:00:00")

Factory
defaults

(65535 00000 FYI00919 "All settings have
been restored to their factory defaults. Reboot
is required to take effect.")

Generated when a factory default has been
performed on the projector.

Networking

(65535 00000 FYI00915 "Configured
network: IP:192.168.228.6 Mask:
255.255.252.0 Gateway:192.168.228.1")

Generated when the network settings have
changed. Network settings can change due to a
number of specific events such as:

• Operator changes the network settings

(through any of the standard interfaces).

• DHCP lease is renewed.

• Network cable was unplugged or plugged in.

Status

(65535 00000 FYI00000 "(SST+LAMP?001)
Lamp Hours = 00:00 (h:m)")

Generated when a status item changes from:

• An error or warning state to an OK state.

• An OK or error state to a warning state.

• An OK or warning state to an error state.

(65535 00000 ERR00000 "System Warning:
(SST+LAMP?001) Lamp Hours = N/A")

(65535 00000 ERR00000 "System Error:
(SST+VERS?003) Image Processor HW Version
= Detection Fault")

Boxer 4K Serial API Commands Technical Reference

020-101697-05 Rev. 1 (07-2017)

Содержание Boxer 4K




















































Результаты поиска

Содержание Boxer 4K

Отзывы:

Похожие инструкции для Boxer 4K

Бренды по названию

Популярные бренды

Christie Boxer 4K, Техническое описание

Результаты поиска

Содержание Boxer 4K

Отзывы:

Похожие инструкции для Boxer 4K

Бренды по названию

Популярные бренды