Christie 4K35-RGB, Техническое описание

Страница: 59 / 67

Commands
Command Description Values
TDM <mode> Controls when input signals are processed
as 3D or not. (Saved value) 0 = Turns off 3D processing for direct input
signals. Has no effect when a Dual Input 3D
port configuration is selected. Useful for
displaying 2D 120Hz signal. It prevents a
Missing External 3D Synch
SPC-2145
event from occurring.
1 = Automatically determines whether to
enable 3D processing or not. When input
signals are 60Hz or less, no frame doubling
or tripling occurs unless a Dual Input 3D
channel is selected. (Default)
2 = Configures the projector to enable 3D
processing where possible. Frame doubling
occurs when input signals are 60Hz. Frame
tripling occurs when input signals are
48-50Hz.
3 = Side-by-Side 3D
5 = Top-and-Bottom 3D
6 = Frame Packing 3D
Examples
Turn off 3D processing for direct input signals:
(TDM 0)
Automatically determine whether to enable 3D processing or not:
(TDM 1)
Configure the projector to enable 3D processing where possible:
(TDM 2)
TDN–Invert 3D Input
Inverts the left and right eye frames.
Only applies to: Models with the Mirage license applied
Commands
Command Description Values
TDN <0 | 1> Inverts left and right eye frames. (Saved
value)
Enabled when the selected signal is a 3D
signal and the 3D mode is enabled. 0 = Leaves the left and right eye frames in
their default order (Default)
1 = Reverses the order of the left and right
eye frames
Serial API commands
Christie Technical Reference–Serial Commands 59
020-103316-07 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.