Christie 4K35-RGB, Техническое описание

Страница: 40 / 67

Command Description Values
1 = Enables the green lasers (Default)
LAS+ERED <0 | 1> Enables or disables the red lasers. 0 = Disables the red lasers
1 = Enables the red lasers (Default)
LAS+GRNP <value> Sets the drive level of the green lasers. The
actual value sent to the laser rack is
reduced based on the Master Laser Power.
(Saved value)
Expressed as percentage with 1 decimal
point. 0 to 1000, where 1000 = 100%
615 (Default)
LAS+MAXA <value> Configures the projector to operate correctly
up to the specified maximum ambient
temperature in Celsius. (Saved value)
Only applies to: Christie M RGB Series and
Griffyn Series 0 to 50
35 (Default)
LAS+MAXH <value> Sets the expected relative humidity in
percent of the environment where the
projector is operating. (Saved value)
This is only applicable if the projector is
running LiteLOC
™
with User mode active.
Only applies to: Christie M RGB Series and
Griffyn Series
0 to 100
80 (Default)
LAS+MODE <value> Enables or disables LiteLOC.
Only applies to: Christie M RGB Series and
Griffyn Series 0 = LiteLOC 1 (deprecated)
1 = Disables LiteLOC
2 = LiteLOC 2 (deprecated)
3 = Enables LiteLOC (Default)
LAS+POWR <value> Adjusts the overall output of the lasers while
maintaining the overall ratio of power
between each color. (Saved value)
Expressed as percentage with one decimal
point. 0 to 1000, where 1000 = 100%
750 (Default)
LAS+REDP <value> Sets the drive level of the red lasers. The
actual value sent to the laser rack is
reduced based on the Master Laser Power.
(Saved value)
Expressed as percentage with one decimal
point. 0 to 1000, where 1000 = 100%
820 (Default)
LAS+UDEC <value> Enables either automatic or manual setting
of LiteLOC user defined environmental
controls. (Saved value)
The manual selection allows user selection
of LAS+MAXA and LAS+MAXH values.
Only applies to: Christie M RGB Series and
Griffyn Series 0 = Automatic—the software calculates the
maximum ambient and humidity conditions
(Default)
1 = Manual selection—allows for more user
tuning in LiteLOC
Serial API commands
Christie Technical Reference–Serial Commands 40
020-103316-07 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.