Christie 4K35-RGB, Техническое описание

Страница: 20 / 67

Command Description Values
CCA+BOFW <blue of white
saturation value> This command is only available if the video
electronics are on and Custom is selected.
(Saved value)
CCA+RDPX <x coordinate for
red>
CCA+RDPY <y coordinate for
red>
CCA+GNPX <x coordinate for
green>
CCA+GNPY <y coordinate for
green>
CCA+BLPX <x coordinate for
blue>
CCA+BLPY <y coordinate for
blue>
CCA+WHPX <x coordinate for
white>
CCA+WHPY <y coordinate for
white> Sets the native color primaries for the
projector using the x,y coordinate form,
scaled by a factor of 10,000. For example,
an x value of 3350 corresponds to x=0.3350
in the CIE 1931 chromaticity scale.
This command is only available if the video
electronics are on and Max Drives is
selected. It is only available to a service
user. The valid range for each value
depends on which red/green/
blue/white point is being
adjusted.
CCA+RSET Resets the native color primary settings to
their defaults.
If primary settings have not been saved
(CCA+SAVE), this resets the primary
settings to hard-coded defaults.
This command is only available if video
electronics are on. It is only available to a
service user. —
CCA+SAVE Saves the current primary settings (for
example, CCA+RDPX, and so on) as the new
default color primary settings.
Save these settings after calibrating the
color primaries (such as measuring the
primary x,y coordinates using a
spectroradiometer or similar equipment).
This command is only available if video
electronics are on. It is only available to a
service user. —
Examples
Use a custom color table:
(CCA+SLCT 3)
Reset values to "HD Video (ITU-R BT.709)”:
(CCA+COPY 2)
Change the x-coordinate of the custom color table to 0.6753:
Serial API commands
Christie Technical Reference–Serial Commands 20
020-103316-07 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.