3 : O p e r a t i n g t h e P r o j e c t o r
CHRISTIE INC.
CHRISTIE INC. -
-
35/70 Service/PM Manual
July, 1997
G 2 : T h e S E L E C T F R A M E R A T E S C o m m a n d s [ D X ]
This diagnostic command allows entry of the selected frame rate and the number of perfs per frame. Default values are 30
fps and 5 perforations unless specified otherwise. When using 35mm film select 5 perforations.
E
NTRY
:
<CMD-G>, <2>
C
ODE
:
G2
I
NPUT
:
1. Select the frame rate:
•
Enter a
2
from the keypad to select 24 frames per second
•
Enter a 5 from the keypad to select 25 frames per second
•
Enter a
3
from the keypad to select 30 frames per second
•
Enter a
4
from the keypad to select 48 frames per second
•
Enter a
6
from the keypad to select 60 frames per second.
2. Select the number of film perfs:
•
Enter a
5
from the keypad to select 5 perfs.
•
For models equipped with 8-perf capabilities, enter an
8
from the keypad to select 8 perfs.
A
CTION
S
:
1. Reset frame rate and number of perfs.
2. Display frame rate in the second- and third-last positions on
the LED display, as shown in Figure 2.3.
3. Display number of perfs in the last position on the LED
display, as shown in Figure 2.3.
S
TATUS
:
Unchanged.
5 perfs
30 fps
SEC
FRS
MIN
HRS
Figure 2.3: SELECT FRAME RATES LED Display