Christie 174-005106-XX Скачать руководство пользователя страница 8

Страница: 8 / 49

Electrical Hazard

Risk of electric shock.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to service the product.

Warning! If not avoided, the following could result in death or serious injury.

Electric shock hazard. To avoid personal injury, disconnect all power sources before
performing maintenance or service.

Electrocution hazard. To avoid personal injury, always disconnect all power sources
before performing maintenance or service procedures.

Harmful ozone hazard. To avoid personal injury, follow installation and operating
instructions.

UV-C hazard. To avoid eye or skin exposure to unshielded product, follow installation
and operating instructions.

Caution! If not avoided, the following could result in minor or moderate injury.

Hot surface hazard. To avoid personal injury, allow the product to cool for the
recommended cool down time before touching or handling for maintenance or
service.

Notice. If not avoided, the following could result in property damage.

General hazard.

Mandatory action

SHOCK HAZARD! Disconnect all power sources before performing maintenance or service
procedures.

Consult the service manual.

Electrical labels

Indicates the presence of an earth ground.

Introduction

CounterAct Installation and Setup Guide

020-103456-01 Rev. 1 (09-2021)

Содержание 174-005106-XX


















































Результаты поиска

Содержание 174-005106-XX

Отзывы:

Бренды по названию

Популярные бренды

Christie 174-005106-XX, Инструкция по установке и настройке

Результаты поиска

Содержание 174-005106-XX

Отзывы:

Бренды по названию

Популярные бренды