Freeze-dryer Epsilon 1-4 LSCplus
Freeze-dryer Epsilon 2-4 LSCplus
8 Maintenance and service
116 / 152
Version 07/2022, Rev. 3.0 of 20/07/2022
• sb
Translation of the original operating manual
Pos : 241 /200 Chris t/360 GT-BA Labor-Pil ot ( STAND ARDMO DULE)/080 W artung und I nst andhaltung/ 080-0010- 0022-0010 F olienbesc hichtung der Beladetür Epsilon Standar d 2. 0 @ 92\m od_1658308697576_68.docx @ 967406 @ 4 @ 1
8.1.2.1
Lamination of the loading door with a special film
Freeze-dryers with an acrylic glass door are equipped with the special
Radiation Shield film on the exterior side of the acrylic glass door (see
chapter 6.5 - "Loading door").
NOTE
For technical reasons, inclusions are possible. However, they do not
prevent the film from performing its function.
NOTE
In the case of acrylic glass doors with a Radiation Shield film, visible light
reflexions are possible. This is not a defect but rather the natural
consequence of the high-performance film.
To prevent the film from being damaged, compliance with the following
points is mandatory for cleaning:
•
In case of a contamination with toxic, radioactive or pathogenic
substances, clean immediately with a suitable decontamination agent
(see chapter 8.2 - "Disinfection of the drying chamber and
accessories").
• Clean with plenty of water immediately after use to ensure that
contaminants are flushed off and not wiped off.
CAUTION
Do not clean the film while dry.
• Use soft cloths, soft sponges made of synthetic fibres or rubber
squeegees and common household cleaning agents (glass cleaner) for
cleaning. The cleaning agents must be free from abrasive agents.
• Do not use hard sponges, cloths or brushes for cleaning.
• Avoid strong mechanical stress during cleaning.
Pos : 242 /010 Univ ers almodul e/ Seit enwechs el @ 0\mod_1202116244312_0.docx @ 105 @ @ 1
