Panning machine
Chocolate World
13/07/2012 Rev.: 1.1
7
MAINTENANCE
6
Figure 12
N.B: The air-duct filter is in fact a polyester filter treated with resins. If it needs to be replaced, it
should be replaced with another similar filter or, if no such replacement filter is available, please
contact the Manufacturer.
TASKS TO BE PERFORMED AFTER EVERY 20 HOURS OF WORKAESS
•
CLEANING THE AIR DUCT DELIVERY LINE.
It is MANDATORY for the unit to be switched off whenever this task is being performed.
Adhere to the following procedure:
-
Press the
STOP
button and unplug the power cable from the power outlet;
-
Remove the pipe from the unit body as described earlier in the “CLEANING THE DRUM” section.
-
Clean the outside of the pipe in the same manner as was indicated in the “CLEANING THE
OUTSIDE OF THE UNIT” section.
-
Use only lukewarm water to flush out the inside of the tube;
-
Use a clean, dry cloth to dry off the inside of the pipe, or alternatively allow it to air-dry.
-
Re-fit the pipe as indicated in the “CLEANING THE DRUM” section.
7.2 EXTRAORDINARY MAINTENANCE
Non-scheduled extraordinary maintenance operations involve broken parts and faulty components and
therefore they require a certain amount of specialised knowledge regarding the specific fault (for example
a fault with an inverter or a motor).
In such cases, kindly contact the Manufacturer.
