Chipkin™
VeederRoot® Gateway User Manual
3381 Cambie Street, #211
© 2018 Chipkin Automation Systems
Vancouver, BC, Canada, V5Z 4R3
All rights reserved
1-866-383-1657
Page 34 of 67
5.
READING DATA AND TEST PROCEDURE
This section contains information on how to view the VeederRoot data.
Important Note: These next sections display sample data using a default configuration. The
Modbus Map and BACnet objects are generated during the configuration process, so they will
change and will be different than what is described here.
READING DATA USING HTML / WEB Browser
To view the data on the device’s webpage, enter the following URL into a web browser:
http://{ipaddress}/bin/veederrootserial/reports
where {ipAddress} is the IP Address of the gateway.
The link will open a web page containing a table of the stored values as well as the Modbus Register
and BACnet IP object and units associated with that data point.
See the image below for an example
of the data.
Figure 5.1-1 - Example Reports Page
READING MODBUS DATA
You can access Modbus register data from the gateway by using a Modbus RTU or TCP client. To find
out what registers exist on the device, please refer to the
Modbus Register Map
. For some guides on
Modbus, please refer to the following links:
•
•
