INST.No.INE-454-P2 Software
Ver.1.2
-23-
1) To enter the Selection of temperature display and analog output
correction for programming item, press SEL key in the [4.10.4
Entering of data after temperature display and analog output
correction] screen.
“End” appears in the sub display as shown in the right figure.
2) By pressing
key, “cont”, “CAnc” or “Go” in the main display
will blink
3) Use
or
key to select temperature display and analog output
correction for programming item.
4) To activate this programming, press ENT key
4.10.5 Selection of temperature display and analog output correction
for programming item
This mode is for the selection of “Modifying programmed desired value”, “Canceling programmed
desired value and exiting from this mode” or “Execution of correction command” of above [4.10.1]
up [4.10.4] in the [4.10 Temperature display/Analog output correction programming]
.
Tb CONT MEM PEAK
AL
AH
C
F
ε
[Correction programming items]
cont
: Confirm and modify programmed desired value again.
By pressing SEL key here, it enters into [4.10.2
Programming of temperature display and analog output
correction data No.] screen.
For modifying the desired value, modify the programmed
value in reference to [4.10.2] up [4.10.4] .
Press SEL key in the case of only the confirmation of
data.
The screen changes from [4.10.2] to [4.10.4)] at each time
in pressing SEL key
CAnc:
Canceling programmed desired value of [4.9.3-2)] to
[4.9.3-5)] and exiting from this mode.
Data returns before the correction.
By pressing SEL key here, it enters into [4.11 Analog
input programming Temperature display/Analog output
correction programming] screen.
Go:
Executing the temperature display and analog output
correction by correction command
4. Engineering mode
[Canceling programmed
desired value]
[Execution of correction
command]
[Modifying programmed
desired value]
•
The default is
cont
(Modifying programmed desired value).
R e m a r k s
Tb CONT MEM PEAK
AL
AH
C
F
ε
Main display
Sub display
Tb CONT MEM PEAK
AL
AH
C
F
ε
Sub display
Main display
Main display
Sub display
